No upload · No software · Runs in your browser
Bass Booster
Add bass to a song without making it distort. Drop in an MP3, WAV, M4A, FLAC or almost any audio file, pick a bass level, and download a bass boosted MP3. The tool raises the low notes and then sets the volume so the louder bass does not clip. It runs in your browser, so the song is never uploaded.
Drop your audio file here or click to browse
Any audio format · Max 20 MB
Bass boost at a glance
Drop the song into the bass booster above, pick a level from Light (+4 dB) to Extreme (+15 dB) and click Boost Bass. The tool raises the notes below about 110 Hz and turns the song down just enough that the louder bass does not clip. You get a 192 kbps MP3, and the file never leaves your browser.
- Four levels — +4, +8, +12 and +15 dB of bass.
- No clipping — output peaks about 2 dB below full scale.
- Expect it quieter — room for bass comes from lowering the whole song.
- Want the sound to move around your head as well? Try 8D audio.
How it works
- 1Drop your song into the box. MP3, WAV, M4A, FLAC, OGG, AAC and AIFF work, and so does the sound from a video file.
- 2Pick a bass level: Light (+4 dB), Medium (+8 dB), Heavy (+12 dB) or Extreme (+15 dB). Start with Medium.
- 3Click 'Boost Bass'. The tool first measures how loud the boosted song would get, then turns it down by just that much and saves it as a 192 kbps MP3.
- 4Play the result. If the bass is too strong or too weak, choose another level and run it again.
Use cases
Songs for the car
Car speakers and subwoofers are where a bass boost is heard most. Use Medium for everyday listening and Heavy if your system has a subwoofer that can play deep notes.
Workout and party playlists
A stronger kick drum and bass line make a track feel more driving at the gym or on a party speaker. Light or Medium is enough for most pop, hip-hop and dance music.
Bass boosted edits for videos
Short videos and edits often use a bass boosted version of a song. Make the edit here, then add the MP3 to your video in your editor.
Thin or old recordings
Some older recordings and phone recordings sound thin. A Light boost adds body to the low end. It cannot add bass that was never recorded, but it lifts what is there.
Checking a mix on small speakers
If you make music, a quick boost shows how your kick and bass hold up when a listener turns the bass up on their own system.
What a bass boost does
A bass boost makes the low notes of a song louder and leaves the rest alone. This tool uses a low-shelf filter: everything below about 110 Hz is raised by the amount you pick, and the boost fades out above that point. Kick drums, bass guitars and synth bass live mostly in that range.
The four levels are fixed amounts. Light adds 4 dB, Medium 8 dB, Heavy 12 dB and Extreme 15 dB. Every 6 dB doubles the signal level of the bass, so Heavy is about four times the level of the original low end.
Why the boosted song does not clip
Most finished songs are already as loud as a file can be. If you add bass on top, the peaks go past the limit and get cut off. That is clipping, and it sounds like crackle or a harsh buzz on every kick.
This tool avoids it in two steps. First it measures the highest peak the boosted song would reach. Then it turns the whole song down by exactly the amount that peak is over the limit, and only then applies the boost. The result peaks about 2 dB below full scale.
We tested this on a test signal that already peaked at -0.2 dB. After the boost the output peaked at -2.3 dB at every level, and the bass rose by 3.7 dB (Light), 7.3 dB (Medium), 10.8 dB (Heavy) and 13.4 dB (Extreme) compared with the mid tones. The song was turned down by 3.6, 5.7, 8.1 and 10 dB to make that room.
The trade-off: more bass, lower overall volume
Because the song is turned down to make room, a bass boosted file sounds quieter than the original at the same volume setting. That is normal, and it is the price of clean bass. Turn your speaker or headphones up a little to match.
A quiet recording is different. If the boosted peaks still fit under the limit, the tool does not turn anything down, and it never turns a song up.
If you want the loudness of your files to match after boosting, run the result through the audio normalizer, linked under Related tools below.
Which level should you pick?
— Light (+4 dB): a small lift. Good for music that already has solid bass, and for headphones.
— Medium (+8 dB): a clear, obvious boost. The best starting point for most songs.
— Heavy (+12 dB): strong bass for car systems and speakers with a subwoofer.
— Extreme (+15 dB): the classic bass boosted sound. The mids and vocals sit far back.
What you hear depends on your speakers. Phone and laptop speakers cannot play very low notes, so a boost can sound small on them and huge in a car. Judge the result on the speakers you will use, and trust your own ears over the number.
Your song stays on your device
The tool runs FFmpeg inside your browser. The song is read from your disk, processed in the page and offered back as a download. It is not uploaded to a server, so nobody else can see or keep it.
Frequently Asked Questions
How do I bass boost an MP3 file?
Drop the MP3 into the box above, choose a bass level and click 'Boost Bass'. When it finishes, play the result and download it. The output is an MP3 at 192 kbps. Other formats such as WAV, M4A and FLAC work the same way.
Is this bass booster free?
Yes, for 1 full file a day, for audio up to 10 minutes, from files up to 20 MB: one song a day comes out boosted at full length. After that, or for longer audio, you get a 10-second preview, up to 5 times a month. Pro removes these limits and raises the file size limit to 500 MB.
Will the bass boost make my song distort?
It should not clip. Before boosting, the tool measures the loudest peak the boosted song would reach and lowers the song by that amount, so the result peaks about 2 dB below full scale. At Extreme the bass is very strong and small speakers may rattle or distort on their own; that comes from the speaker, not the file. Try a lower level if it sounds rough.
Why is my bass boosted song quieter than the original?
A finished song has no free room above its peaks. To add bass without clipping, the whole song has to come down first. In our test a full-volume song was lowered by 3.6 dB at Light and 10 dB at Extreme. Turn up your playback volume to match.
Which bass level is best?
Start with Medium (+8 dB). Go to Light if the song already has plenty of bass or you listen on headphones, and to Heavy or Extreme for car systems and subwoofers. The right level depends on the song and on your speakers, so listen and adjust.
Does it work on a phone?
Yes. It runs in Safari and Chrome on iPhone and Android. Tap the box to pick a song from your files. Use headphones or a speaker to judge the bass, because a phone speaker cannot play deep notes.
Can I boost the bass of a video?
You can drop in an MP4 or MOV file and the tool boosts its sound, but the result is an MP3 audio file, not a video. To use it in a video, add the MP3 back in your video editor.
Read more
Audio Normalization: Peak vs Loudness — When to Use Each
Understand peak normalization vs loudness normalization (LUFS). Learn which to use for streaming, broadcasting, podcasting, and music production.
What Is 8D Audio and How Does It Work?
8D audio is a stereo effect that pans sound around your head. Learn how it is made, why it needs headphones, and how it compares to real spatial audio.
Audio Bitrate Explained: What It Means for Quality
Understand audio bitrate, how it affects sound quality and file size, and how to choose the right bitrate for your needs.