AudioUtils

No upload · No software · Runs in your browser

MP3 Volume Booster

Make a quiet MP3 louder. Drop in a song, a voice memo or a recording, choose how much louder you want it, and download the result. The tool measures the file first, so the louder version does not clip. It runs in your browser and the file is never uploaded.

Drop your audio file here or click to browse

Any audio format · Max 20 MB

Make an MP3 louder at a glance

Drop the MP3 into the volume booster above and choose Max. The tool measures the loudest peak and raises the whole file by exactly the room that is left, so it gets as loud as it can without clipping. You can also add a fixed 3, 6, 9 or 12 dB. The result is a 192 kbps MP3, and the file never leaves your browser.

  • Best for quiet files — a recording that peaks at -14 dB can gain about 12 dB.
  • No clipping — in our tests output peaks stayed at least 1 dB below full scale.
  • Already loud? — a song at full volume gains little, and only by pressing its peaks.
  • Want more low end instead of more volume? Try the bass booster.

How it works

  1. 1Drop your file into the box. MP3 is the usual one; WAV, M4A, FLAC, OGG and AAC work too.
  2. 2Choose Max to raise the file as far as it can go with no squashing, or pick +3, +6, +9 or +12 dB.
  3. 3Click 'Make Louder'. The tool measures the loudest peak, applies the gain and saves a 192 kbps MP3.
  4. 4Play the result. If it is still too quiet, try a higher step.

Use cases

Quiet voice memos and phone recordings

Recordings made far from the microphone often play back very quietly. Max brings them up to full level so you can hear them without turning your speaker all the way up.

Lectures, interviews and meetings

A recording from the back of a room is usually clean but low. Raising it makes speech easier to follow and easier to transcribe.

Old MP3s that play quieter than the rest

Songs ripped or downloaded years ago can sit well below modern tracks. Boost the quiet ones so you do not have to reach for the volume between songs.

Audio for a video or a slide show

If a voice-over or a clip is too soft next to the other sound in your project, raise it here first and then import the louder file.

Ringtones and alerts

A ringtone has to be heard across a room. Bring a quiet clip up to full level before you set it on your phone.

Max or a number of decibels?

Max is the safe choice. The tool finds the loudest peak in your file and raises everything by exactly the room that is left, so that peak lands about 1.5 dB below full scale. Nothing is squashed and the sound keeps its shape. In our tests a quiet recording that peaked at -14 dB was raised by 12.5 dB, and one that peaked at -15.4 dB by 13.9 dB.

The decibel steps add a fixed amount. +3 dB is a small lift, +6 dB is a clear one, and +12 dB is a lot. If your file has that much room, the result is the same clean gain as Max, only smaller.

If you ask for more than the file has room for, a limiter holds the peaks under the ceiling. The quiet parts still come up, so the file sounds louder, but the loudest parts are pressed together. Used hard, that makes music sound flat.

Why the louder file does not clip

A digital file has a top level it cannot go past. Push the sound over it and the tops of the waves are cut off, which you hear as crackle. That is clipping.

This tool never pushes past the top. It measures first, and a limiter sits at 1.5 dB below full scale as a ceiling. In our tests the loudest output peak was between -1.0 and -1.9 dB for files raised to the limit, and lower for the smaller steps. It never reached full scale.

What it cannot do

A file that is already at full volume has no clean room left, so Max leaves it about as it is (in our tests it came out 0.3 to 0.8 dB lower because of the safety ceiling). The decibel steps can still raise it by pressing the peaks down, and how much depends on the sound. A drum-heavy test track at full level gained 4.5 dB at the +6 step and 5.5 dB at +12. A steady tone at full level gained 0.5 dB at most. Many finished songs are already at full level.

A boost also raises everything in the recording. Hiss, hum and room noise come up with the voice. The tool makes a quiet recording louder; it does not clean it.

Volume booster or normalizer?

Use this tool when one file is too quiet and you want it as loud as it can cleanly go. Use the audio normalizer, linked under Related tools below, when you have several files and want them all at the same loudness, or when a platform asks for a set loudness level.

Your file stays on your device

The tool runs FFmpeg inside your browser. The file is read from your device, made louder in the page and offered back as a download. It is not uploaded to a server.

Frequently Asked Questions

How can I increase the volume of an MP3 file?

Drop the file into the box above, choose Max or a number of decibels, and click 'Make Louder'. Play the result and download it. The output is an MP3 at 192 kbps.

How many decibels should I add?

Start with Max. It gives the loudest result that keeps the sound unchanged. Use +3 or +6 dB if you want only a small lift. Use +9 or +12 dB when a recording has a few loud moments and long quiet parts, and you accept that the loud moments get pressed down.

Will making it louder reduce the quality?

The gain itself does not change the sound when it fits in the room the file has, which is what Max does. Two things can affect quality: a boost bigger than the room presses the loud parts together, and the file is saved again as an MP3, which is one more lossy step. At 192 kbps that step is hard to hear.

Why did my song barely get louder?

It was already at full level. A file whose peaks are at the top has no clean room left, so Max changes almost nothing and the decibel steps can only press the peaks down. In our tests such files gained between 0.5 and 5.5 dB depending on the sound. This tool helps most with recordings that are truly quiet.

Is the MP3 volume booster free?

Yes, for 1 full file a day, for audio up to 10 minutes, from files up to 20 MB: one file a day comes out louder at full length. After that, or for longer audio, you get a 10-second preview, up to 5 times a month. Pro removes these limits and raises the file size limit to 500 MB.

Can it make my phone or speaker louder?

No. This tool changes an audio file. It does not change the volume of your phone, your browser tab or your speaker. For that you need the device's own volume settings.

Does it work with WAV, M4A or FLAC?

Yes. It accepts WAV, M4A, FLAC, OGG and AAC as well as MP3. The result is always saved as an MP3.